SAVE 30% OFF YOUR CANVAS PRINT ORDER TODAY, Promo code: 30MAR24

 

San Diego Print On Canvas, Custom Made Wood/Metal Frames, Block Mounting & Handmade Oil Paintings
   Toll Free: 1-888-533-6278 (KeenART)      Deals  
  My Account     My Uploads     My Cart  

 PLEXI FACE MOUNTS
If you're looking for a contemporary way to display your favorite photograph or fine art print without the distraction or additional cost of a frame, then plexi face mounting is a method to consider. When your beautiful Giclée paper print is enclosed between a sheet of high quality acrylic glass and an aluminium Di Bond panel, the result is an uninterrupted, vividly modern display that highlights both the image and your wall.

Read on to learn all about the face mounting process, or skip to the bottom to see our comprehensive price list.


SUMMARY

A plexi face mount is constructed from three main components:
  • Acrylic glass cover
  • A print on glossy or metallic paper
  • Aluminium Di Bond backing

Your photograph or art reproduction is printed and mounted onto the front and back surfaces with high quality adhesive film. It is then fitted with a custom floating hanger, which gives your display the illusion of floating off the wall.

Your plexi face mount will have vivid colors or piercing blacks and whites. This is due to the unique reflective qualities of the plexiglass when it is adhered to the print. An almost three dimensional effect is achieved.

The archival inks will ensure your image remains as bright and beautiful as the day it was printed, for generations. The inks, papers, and mounting film are all formulated to prevent fading or other damage from UV rays.


 WHAT IS A PLEXI FACE MOUNT?
Today, some companies offer photographs and art reproductions printed directly on glass or acrylic. The problem with this method is that glass is clear, and we are accustomed to viewing printed images on a white surface. As a result, colors on direct to glass prints can be less vibrant, and the inks can wear or chip off the clear cover over time.

A plexi face mount is a more permanent choice that results in bolder colors and no wear to the image. Your unique print will be made up of three distinct layers:

  • High quality acrylic glass. The crystal clear cover (or glazing) consists of a 3 mm thick, top grade acrylic sheet, cut exactly to size. The edges are neatly routered for sharp corners that are smooth to the touch. Reflection in the space between the print and the glazing is eliminated - because there is no space - so light reflects differently than it does on a framed image. The print appears sharper, and has an almost three dimensional effect.

  • A high resolution print. Choose between our two popular paper types for a print that really stands out. Our glossy paper will give an added shine, and a metallic paper will give your image a pearlized sheen that is enhanced by the acrylic. Whichever you pick, your print is create don a high quality, large format printer using special Giclée inks that are UV resistant. This means your image will stay bold and beautiful for decades.

    Once printed, this layer is affixed to the acrylic with a very thin, transparent mounting tissue that contains UV stabilizers that compound the preventative effects of the ink. The tissue will not yellow over time - it in no way affects the look of your print.

  • Aluminium Di Bond. Di Bond is a composite aluminium material made by sandwiching a thin, polyethylene plastic sheet between two sheets of painted, .012" aluminium. It is smooth, completely rigid, and made to last.
A plexi face mount has three main layers: plexiglass, print, aluminium backing
The layers of a plexi face mount.

 IMAGE OPTIONS FOR YOUR PLEXI FACE MOUNT
The first step of the plexi face mounting process is to choose the image you would like to display. Any image will do, though vivid colors certainly create the most striking final product. Depending on the quality of your digital image, you can order a product up to 60 united inches (length + width).

We will work with you to fine tune or touch up your photograph or other digital image until it is just right.

Can't decide on just one? How about a collage? Our graphic designer can arrange your images in any style you would like, using anywhere from two to eight or more photographs from a family picnic, far away vacation, or photo shoot.

Want to include a whole bunch of photos? Choose a single source image (or simply a shape), and our designer will create a unique photo mosaic of that image using your other photos. You can select up to one thousand images for a mosaic.

Once the image is finalized, sit back and let us create the perfect piece of contemporary wall art.

A bold, bright collage is a great option for your plexi face mount
A plexi face mount will make a pop art collage really pop.

 HOW IS MY PLEXI FACE MOUNT MADE?

YOUR IMAGE

Once you have selected the image or images you want to appear on your face mount, the technician will print your photo using a high quality ink jet printer. Archival, aqueous pigment inks - water-based ink that is color fast for up to 100 years - will create a bold, beautiful reproduction of your digital file on your choice of glossy or metallic paper.

YOUR FACE MOUNT

Your print is now ready for mounting!

  • First a 3 mm sheet of crystal clear plexiglass is cut to exactly the size of your print. A sheet of Di Bond is cut the same.

  • A piece of transparent, tissue-thin film is placed between the Di Bond and the back side of the print, cut to slightly larger than the print. When this "sandwich" passes through a rolling laminator, or a flat bed heat press, the tissue is activated and creates an adhesive bond between the outer materials. It is important at every stage of this process to ensure no dust particles come into contact with the print - even the smallest piece of lint or fuzz will show up clearly in the finished product.

  • Another piece of film is placed between the now-rigid print and the plexiglass. When this bundle passes through the laminator or heat press, the film seals the plexiglass to the front side of the print. The film used to adhere the parts of the face mount together is UV stabilized. This means the film itself will not yellow over time, and it will also help to protect the print from light damage. In addition, the film is formulated to maintain a firm bond for as long as your print will be displayed.

    Alternately, the aluminium sheet may have an adhesive already in place. In this case, this adhesive will be used in lieu of a second piece of mounting tissue/film.

  • Your print is now securely encased within the plexiglass and aluminium Di Bond, but there is currently no way to hang your bold new decor on the wall. Fear not, this is where an innovate piece of hardware comes into play.

    A float mount hanging system will be installed on the back of your face mount using a heavy duty adhesive. The hanger resembles a metal frame, and can be cut to fit your piece precisely - that is, approximately two inches smaller on each side. This way, your face mount appears to float off the wall, with the hardware invisible from the sides.

    Once the hanging hardware is attached, your plexi face mount can be hung with nothing more than a nail or two in the wall.

Your plexi face mount is less than 1/2 inch thick once completed
The face mount has a total thickness of only 6 mm.

A float mount hanger gives the illusion your image is floating off the wall
The invisible hanger creates the illusion of floating.


 WHY SHOULD I ORDER A PLEXI FACE MOUNT?

PROS

There are many reasons to choose a plexi face mount instead of a regular framed print.

  • By attaching the plexiglass directly to the print, a sense of depth is achieved, resulting in an almost 3D effect. Reflection may be diminished compared to a regular framed image.

  • Sometimes the glass over prints can dull the image. With a face mount, the combination of the glossy or metallic paper and the high shine plexiglass results in vivid, rich color every time.

  • Your face mount is created using the same top of the line inks, papers, and plexiglass used in custom framing. This means your image is equal to a framed print in longevity and quality.

  • If your face mount happens to topple off the wall, there is a good chance it will remain undamaged. There is no frame to crack or break, and the plexiglass is unlikely to chip due to the reinforced backing.

  • Unlike the foam core backing on a framed print, the aluminium Di Bond protects your print from the back just as much as from the front.

  • Once your image is mounted onto the plexiglass, there is no chance of moisture, dust, or other problematic particles working their way between the clear cover and your print - the image will remain just as uninterrupted and clear as the day it was delivered.

DRAWBACKS

There are a few cases where a plexi face mount may not be the best choice for your image.

  • Permanence. Although the materials used in creating your print are archival quality, the plexi face mount itself is not. In order for a print to be considered archival, any display processes carried out must be reversible without damaging the print. Since the mounting film is a permanent adhesive, the print cannot be removed from the plexiglass without ruining it.

  • Scratching. The acrylic plexiglass used in face mounting is very durable, but it can still be scratched with rough handling. Unlike a framed print, if the clear cover of your face mount is noticeably scratched, the entire piece will need to be replaced, not just the plexiglass. However, proper care prevents scratching, and small surface scuffs will not overly inhibit viewing.

  • A plexi face mount is a bit more expensive than a framed print or Canvas Gallery wrap of the same size.
A finished plexi face mount
The result is a high shine and bold color.

 PLEXI FACE MOUNT PRICE LIST
Plexi face mounts are priced based on width and height. You can order any custom size, below are pricing for some pupular sizes:

NOTE: The maximum Fcae Mount size available is 60" by 30". Use our online price calculator for other sizes pricing: Face Mount Price Calculator

Width x Height PRICE
8" x 10" $123
10" x 15" $161
Width x Height PRICE
12" x 18" $206
24" x 16" $311
Width x Height PRICE
20" x 30" $385
24" x 36" $522
Width x Height PRICE
30" x 45" $815
30" x 60" $1137

 HOW TO ORDER A PLEXI FACEMOUNT
Have your next artistic photograph or art print transformed into a stunning piece of unique decor with a plexi face mount. To order your one-of-a-kind product simply upload your digital files online and continue from there:

ORDER PLEXI FACEMOUNT ONLINE.

Small 9x12 inch Plexi Face Mount
Small 9x12" Plexi Face Mount
PLEXI FACE MOUNTS EDGES

Plexi Face Mount Edges
Face Mount Edges, Close-up

Plexi Face Mount Edges, Close-up
ACRYLIC FACE MOUNT
Light Reflections
ACRYLIC FACE MOUNT
30x20" Face Mount & Vibrant colors
PLEXI FACE MOUNT C-BAR BACKING

C-Bar Hanging System for a 9x12" Face Mount
PLEXI FACE MOUNT C-Bar Hanging System

C-Bar Hanging System for a 30x20" Face Mount


 Face Mounting Prints On PlexiGlass - FAQs:

Q1 : What is a plexi face mount?
Q2 : What kind of print can I get in a plexi face mount?
Q3 : Is plexi face mounting an archival option?
Q4 : What are the benefits of choosing plexi face mounting?
Q5 : How is my plexi face mount made?
Q6 : How do I clean my plexi face mount?
Q7 : Can I send you my print to be mounted?
Q8 : How long will my plexi face mount order take?
Q9 : How heavey is a plexi face mount?
 

Q1 : What is a plexi face mount?
A plexi face mount is a frameless way to display your printed images. A metallic or glossy print is sandwiched between a sheet of aluminium di-bond and a sheet of crystal clear plexiglass. The three pieces are fused together using a cold press.

Your image will have enhanced color and a three dimensional appearance due to the plexiglass being affixed directly to the print. The plexi face mount is hung with an "invisible" hanger that gives the appearance your print is floating off the wall.

For more information, read our in-depth article on Plexi Face Mounting.

Q2 : What kind of print can I get in a plexi face mount?
Any image you choose can be transformed into a beautiful, frameless plexi face mount. Photographs are the most popular choice, but you can get great results from a vibrant abstract painting or other artwork, too.

You can choose between metallic and glossy paper for your print.

Q3 : Is plexi face mounting an archival option?
No. Because the plexiglass and aluminium backing cannot be removed without damaging the print, plexi face mounting is not an archival or conservation display option. However, your image is printed using archival Gicl&ecute;e inks and top quality papers, and the plexiglass is UV-resistant.

Q4 : What are the benefits of choosing plexi face mounting?
There are many reasons to choose a plexi face mount instead of a regular framed print.

  • By attaching the plexiglass directly to the print, a sense of depth is achieved, resulting in an almost 3D effect. Reflection may be diminished compared to a regular framed image.

  • Sometimes the glass over prints can dull the image. With a face mount, the combination of the glossy or metallic paper and the high shine plexiglass results in vivid, rich color every time.

  • Your face mount is created using the same top of the line inks, papers, and plexiglass used in custom framing. This means your image is equal to a framed print in longevity and quality.

  • A plexi face mount is a bit less expensive than a framed print of the same size. The cost of the frame moulding, custom construction, and matting is avoided.

  • If your face mount happens to topple off the wall, there is a good chance it will remain undamaged. There is no frame to crack or break, and the plexiglass is unlikely to chip due to the reinforced backing.

  • Unlike the foam core backing on a framed print, the aluminium Di Bond protects your print from the back just as much as from the front.

  • Once your image is mounted onto the plexiglass, there is no chance of moisture, dust, or other problematic particles working their way between the clear cover and your print - the image will remain just as uninterrupted and clear as the day it was delivered.


Q5 : How is my plexi face mount made?
  1. First a sheet of plexiglass and a sheet of aluminium are cut to fit your print

  2. A piece of transparent mounting tissue is placed between the print and the aluminium backing. This "sandwich" passes through the cold press, which forms an adhesive bond. (Sometimes the aluminium will have an adhesive attached, which eliminates the need for the tissue.)

  3. The same process is followed to affix the plexiglass to the front of the print.

  4. Once the pieces are fused together, a custom size, heavy-duty hanging system is attached to the aluminium backing. This rectangular frame sits in from the edges of the face mount, creating a "floating" effect. The plexi face mount is hung on the wall using only a nail or two.

    Q6 : How do I clean my plexi face mount?
    Your plexi face mount can be cleaned with a soft cloth and water. Do not use window/glass cleaner. Ensure the cloth is free of debris that might scratch the plexiglass. If you feel you need more than water, cleaners especially for acrylic glass can be found online and in certain stores.

    Q7 : Can I send you my print to be mounted?
    No. We prefer to print your image ourselves as this ensures compatibility throughout the whole process.

    Q8 : How long will my plexi face mount order take?
    The production time for your plexi face mount is 5 - 7 business days. Depending on where you live, shipping can take anywhere from one to 7 days longer.

    Q9 : How heavey is a plexi face mount?
    Roughly 2Ib/Sqft, for example a 36x24 inch Face mount will be roughly 12Ib.
If you don't find the answer you're looking for here, please contact us.
 
 
Quick Info
Home
Contact us
My Account
About us
Sitemap
 
Social Media
Blog
Twitter
FaceBook
Instagram
TikTok
Products
Pricing
Canvas Prints/Frames
Fine Art Prints
Metal & Natural Wood Prints
Handmade Oil Paintings
Plaque Mounting
Custom Greeting Cards
San Diego Wood Picture Frames
San Diego Metal Picture Frames
San Diego Floater Frames
Canvas Stretcher Bars
Custom Stretcher Frames
San Diego Wood Panels Stocked Sizes
San Diego Custom Wood Panels
Gift Certificates
Print Instagram Photos
Jersey Shadow Box Frames
Resin Coatings
Artist Canvas & Frames
Textile Printing, Dye-Sublimation
Coffee Mug Prints
T-shirt Printing
Face Mask Prints
Dovetail joining
San Diego Cityscape & Nature Prints
Services
Artwork Scanning
Collages on Canvas
Word Cloud Design
Effects, Pop art
Artist Gallery program
Local Artists
Classic Art Paintings
Canvas Stretching
Canvas Transfer
Dry Mounting & Lamination
Acrylic/PlexiGlass Sheets
Custom Size Mounting Boards
Classic Art Prints Galleries
Art Galleries
Art Consultation Services
San Diego Art Supplies
Help
Ideas Galleries
FAQs
Glossary, Framing
Resources
How it works?
Canvas Edge Options
Order Problems?
Matboards
ART IN San Diego
Terms & Conditions
Privacy Policy
Order
My Account
Pro Account
Rush Orders
Shopping Cart
Discounts / Newsletter
Referral
Payment Methods
Testimonials
Corporate Art
***  Deals
Shipping
 Paypal  Visa
 MasterCard
American Express
San Diego California Giclee On Canvas, Fine Art Printing - Art Scanning & Reproductions - Handmade Oil Paintings - Custom Wood Panels, Metal Picture Framing - Block/Plaque Mountings, Large Format Dry Mounting & Lamination - Art Supplies: Stretcher Bars, Cradled Wood Panels and Artist Canvas - Collages On Canvas - Plexi/Acrylic Face Mounts - Block Acrylics, Fabric Printing, Dye Sublimation - Cityscape Skyline Prints, Resin, Photo Gifts and more...

A division of USAOnCanvas.com Gallery Picture Frames Sandiego Laser Engraving & Cutting Services



© 2002-2024 - KeenART Media Ltd.